Ricoh 9922DP, Системные настройки, Страница: 25 / 31

User Tools (System Settings)
18
2
System Settings
2
/
5
Menu Description
05. Function Reset How long the machine waits before switching to the default
mode if no operation has been performed after an operation
has finished. The time can be set from 3 to 60, or Instant.
Note
❒
Default: 10 seconds
06. Panel Off Timer The machine enters to Panel Off mode automatically after
your job is finished, after the selected time. The time can be
set from 10 to 999 seconds, or off.
Note
❒
Default: On (60 seconds)
07. Energy Saver Level You can select the Energy Saver level.
❖
Level 1
• Power Consumption:
Reduced by about 40% compared standby mode.
• Warm-Up Time:
about 15 seconds
❖
Level 2
• Power Consumption:
Reduced by about 60% compared standby mode.
• Warm-Up Time
less than 30 seconds
This value applies to Type 1 (Copier features only).
Note
❒
Default: Level 1
08. Energy Saver Timer The machine enters Low Power mode automatically after
your job is finished, after the selected time. The time can be
set from 1 to 240 minutes.
In Low Power mode, power consumption is reduced by
30% compared with Standby mode. This value applies to
Type 1 (Copier features only).
Note
❒
Default: 15 minutes