Ricoh 411402 - EFI Fiery EB-105EX Controller, Руководство по печати

Страница: 45 / 132

3
3-1 Printing to the EB-105EX
You can print to the EB-105EX directly from UNIX workstations. Jobs printed to the
EB-105EX are sent to the Print or Hold queues and can be manipulated from
Command WorkStation, or from Windows and Mac OS computers on the network
using Fiery WebSpooler or Fiery Spooler.
N
OTE
:
If you print to the Hold queue, an operator must intervene from Command
WorkStation, Fiery Spooler, or Fiery WebSpooler for the job to print. Jobs sent to the
Hold queue are spooled to disk and held.
For more information on using Command WorkStation, Fiery Spooler, or
Fiery WebSpooler, see the
Job Management Guide .
The queue name and EB-105EX printer name are determined by your system
administrator. For the names of your queues, contact your system administrator.
For information about setting up printing from TCP/IP, see your UNIX system
documentation.
Printing to the EB-105EX
You can use UNIX commands to print PostScript, TIFF, and PDF files to the
EB-105EX. In general, use basic print commands (lpr, lpq, lprm) to send print jobs to
the EB-105EX. For information about UNIX commands, see the UNIX manual pages
or other documentation.
Chapter 3:
Printing
from UNIX
Workstations