Ricoh 170 / 180 Скачать руководство пользователя страница 50

Страница: 50 / 147

3. Press the Yes key.

FILE NO. 013 Y/N

CLEAR?

4. Either :

❐

Erase the file: Press the Yes key.

❐

Keep the file: Press the No key.

5. Either:

❐

Erase another file: Press the Yes key and go to step 2.

❐

Finish: Press the Function key.

NOTE: When there are no apropriate files, "

NO FILES

" is displayed.

Printing The Stored Messages

1. Press the Function key and 5,1 using

ten keypad, then press the Yes key.

FILE NO.lll KPAD/j k

PRINT LIST

/SEARCH

❐

To print list of files press

key, then press the Start

key.

2. Either:

FILE NO.004 START/N

CHICAGO OFFICE

❐

Scroll through the files on the display: Press the

key until the required file

appears. Then press the Yes key.

❐

If you know the file number, input it directly: Enter the file number, then
press the Yes key.

3. Press the Start key.

Transmission Using The Group Key

1. Either:

❐

Place a document into the feeder.

❐

Press the Quick Dial 10 (Group
Key). Then, enter the group num-
ber.

GROUP Y/START

G1 DISTRIBUTOR

2. Press the Start key.

If You Make a Mistake

If you make a mistake when inputting a name or number, either :

❐

Press the No key to erase the entire name or number and start again.

❐

Press the Clear key to erase the last letter or digit that you entered.

If you enter the wrong function number,

❐

Press the Function key to return to standby mode and start again.

If you dialed the wrong number, either:

❐

Press the No key.

❐

If scanning has already begun, press the Stop key.

❐

If you already programmed the number into the machine by pressing the Yes
key, remove the document from the feeder and start again.

IC OPERA

SENDING IMMEDIATELY VS. SCANNING QUICKLY

Содержание 170 / 180




















































































































































Результаты поиска

Содержание 170 / 180

Отзывы:

Бренды по названию

Популярные бренды

Ricoh 170 / 180, Руководство оператора

Результаты поиска

Содержание 170 / 180

Отзывы:

Бренды по названию

Популярные бренды