3. INSTALLATION
3.1. INSTALLATION PROCEDURE
CAUTION
Do the following before installing the optional unit:
1. Print out all messages stored in the memory.
2. Print out the lists of user-programmed items and the system parameter list.
3. Turn off the main switch, and disconnect the power plug.
Installation Procedure
1. Put the machine on the paper
feed unit [A] and remove the
connector cover [B] (1 screw).
2. Secure the machine to the paper
feed unit with the bracket [C] (2
screws). Then connect the har-
ness [D] to the machine.
3. Install the harness cover [E] (1
screw), and replace the connec-
tor cover [B] (which was removed
in step 1).
4. Remove the bottom plate holder
bracket [F] as shown.
5. Add some paper and turn on the
machine. Make a test print using
the paper feed unit.
[C]
[A]
[B]
[D]
[E]
h110i502.wmf
[F]
h110i503.wmf
August 2nd, 1995
INSTALLATION
INSTALLATION PROCEDURE
9
