Rickard MLM RF, Руководство по эксплуатации, Страница: 2 / 22

2
RICKARD 2018
MLM RF OPERATION MANUAL
Table of Abbreviations
AP Access Point RF base station module
ED End Device RF Wallstat or POD Sensor
LI Link Remote device mode
LIM Link Mode MLM Tool mode
MLM Multi Loop Modular VAV distributed control system
RF Radio Frequency
PS POD Sensor RF thermostat no display
RSSI Receive Signal Strength Indication Signal strength
SA Share Address Mode Remote Device mode
SAM Share Address Mode MLM Tool mode
SP Set Point Temperature control point
WS RF Wallstat RF wall mounted Thermostat with LCD
MCTI Maximum Communication Transmit Interval
Table of Contents
Table of Abbreviations 2
MLM RF Overview 3
Installation and Commissioning 3
Hardware Installation 3
The RF binding process 6
Discover the RF end devices 7
Grouping the Remote units 11
Verify and Replace End Devices 14
Removing an End Device 16
Moving End Device to a different Zone 17
Wallstat Operation 19
Adjust the Wallstat Setpoint 19
19 Set the Wallstat MENU Options
Installing the RF devices 6
Option 1 – Set the Wallstat RTC settings 20
POD Sensor Operation 22
Put the Wallstat in sleep mode (Default off state) 21
Option 2 – Set the Wallstat display for Batt/RSSI 21