28
Fitting the Infill Piece (optional)
A 55mm clearance is required from the back of the hotplate
to the rear wall, to allow the lid to be opened fully. An infill
piece may be purchased to be fitted into this clearance.
Fitting the infill piece between the rear of the hob
and the wall
Fix the infill piece to the wall and ensure it is level with the
hotplate as shown.
N o t e : The 55mm clearance dimension should not be
reduced.
To purchase an infill piece kit, please contact:
Customer Care Centre on 0871 22 22 502
Fix spacer
to wall with
screws
Fit cooker
level with panel
550mm
55mm
