Richiger R1090 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 126

Richiger R1090 Скачать руководство пользователя страница 3

Richiger baggers are designed and manufactured for years of dependable service when used for the purpose for which it is
intended, and when proper maintenance is carried out.
This operator's manual should be thoroughly studied and understood for safe and efficient use of the machine. Keep it near
at hand for consultation and ensure that anyone who uses the machine reads it before he operates it for the first time.

READ THIS MANUAL CAREFULLY.

Pay special attention to symbols and safety decals, and their meaning detailed here,

that you will find on the bagger and throughout this manual.

NEVER OPERATE THIS EQUIPMENT UNTIL USER FULLY UNDERSTANDS THE COMPLETE CONTENTS OF THIS
MANUAL. FOR OWNERS WHO DO NOT OPERATE THIS EQUIPMENT, IT IS THE OWNER'S RESPONSIBILITY THAT
THE USER IS PROPERLY INSTRUCTED AND IS FULLY AWARE OF THIS MANUAL' S CONTENTS.

This is important in the safe handling of this equipment and to promote an efficient operation. If there are any questions
about sections in this manual, it is important to contact your dealer for clarification.

This machine is guaranteed as stated on the next page. A Warranty Registration Card is to be filled and signed with data
pertaining to the machine, the buyer and the seller, and promptly returned to the factory. The card provides a ready
reference to help you in securing warranty and in answering questions that you may have at some later date.

The serial number and identification tag is located in the forward section of the frame. Please refer to these numbers when
parts or warranty communication is necessary.

PLEASE WRITE DOWN THE INFORMATION ABOUT YOUR MACHINE MODEL, UNIT NUMBER AND SERIAL
NUMBER AS INDICATED IN THE REGISTRATION PLATE SO THAT YOU HAVE IT AT HAND IF NEEDED.

MACHINE MODEL:

SERIAL N°:

UNIT N°:

Important information

This is the safety alert symbol. It is used to alert the operator about personal safety and risk factors
involved when using this equipment. Always observed and follow these important instructions in order
to promote safe operation with good work habits.

«
1
2
3
4
5
...
»

Содержание R1090































































































































Отзывы:

Нет отзывов