Richelieu ELEFU, Руководство по установке

Страница: 9 / 9

fourth
4
2
If the handset displays "HOT", let the base rest and cool down for 20minutes.
TROUBLESHOOTING
Error Code
E 4
Hand controller communication
error
Check hand controller line
E 6 Main power start error Change controller box
E 8
The table tilts wh en it is
running
Reset
E09/Hot High temperature Wait for temperature to go down
E11
Motor 1 no connection
Check motor line
E12
Motor 1 current error Change controller box
E13
Motor 1 lose phase line
Check motor line
E14 Motor 1 hall error Check the sensor cable
E18 Motor 1 overload Reduce the load
E21
Motor 2 no connection
Check motor line
E22 Motor 2 current error Change controller box
E23
Motor 2 lose phase line
Check motor line
E28 Motor 2 overload Reduce the load
secured
RESETTING
IMPORTANT: RESET prior to use!
U nplug the power cable and plug cord back in. Then follow RESET instructions above. Buzzer will make a
sound
,
which means reset is finished.
If the desk crashed into something or there is a sudden force on it, our anti-collision feature will
detect and move the desk into opposite direction and stop.
If the handset display s “E8 " , it is the desk
inclination reminder and this code will disappear after 15 seconds.
Plug the power cord into a 110v or 220v outlet.
Press and hold the DOWN button on the handset
until the desk reaches its lowest height. Release the
DOWN button. Press and hold the DOWN button
again for about 10 seconds
until the desk lowers a little bit more, slightly rises
and stops. Release the DOWN button. Your desk is
now ready to use.
us.
Error Detail What to do?
See fault codes below. If fault code is not listed below, please
contact us. Only the manufacturer is capable of correcting
th
e
se fault codes.
MEMORY PRESETS
Move the desk to desired height, press "M" and release,
the handset will then display "S-". Choose the number
where you want to save height.
CHILD LOCK
LOCK: Press and hold "UP" and "DOWN" buttons for 5
seconds until display shows "LOC".
UNLOCK: Press and hold "UP" and "DOWN" buttons for 5
seconds until display shows current height.
9
1
2
3
4
m