RichAuto AutoNow F141 Скачать руководство пользователя страница 5

Страница: 5 / 66

北京锐志天宏科技股份有限公司

Beijing RichAuto S&T Co., Ltd

Forging ahead, create future together!

Foreword

System Introduction:

RichAuto-F141

motion control system for 4 axis linkage engraving machine is

independently developed by Beijing RichAuto S&T Co., Ltd. It can be widely applied to

machinery, advertisement, woodworking, mold engraving machines and soon in the

industry machine control field.

RichAuto-F141

uses DSP as its core, High processing and operation speed which

are the microcontroller, PLC systems can‟t match with; Embedded structure, high degree
of integration, strong stability, easy installation and operation; support U disk, removable

storage card reader, and FTP transport protocol. Adapt USB Interface, high speed transfer,

plug and play. Fully offline work.

Performance characteristics:

1. System standard configuration is X, Y, Z, A four-axis motion control method.

2. Multiple I/O ports control. Standard equipped with I/O signal node which has 16

inputs and 8 output signals.

Support the standard G code, PLT format instructions; support domestic and

international mainstream CAM software, such as:

Type3, Artcam, UG, Pro/E,

MasterCAM, Cimatron, Ucancam etc.

4. Provide with power failed protection. System automatically save the current

processing information in the moment of sudden power down (file name, current line

number, work speed, spindle state);After powered up and returned HOME position,

the system automatically prompts the user to restore the processing before power

down which makes processing operations become more humanity.

5. Support breakpoint memory, select file line No. processing. Can save 8 different

breakpoint processing information.

6. Multi-coordinate memory function. Provide 9 working coordinate system. The User

can switch among the 9 work coordinates, each coordinate system can save a

process origin information.

7. Support adjusting spindle operating frequency (or spindle rotate speed). The spindle

frequency is divided into 8 shifts. During processing, user can adjust shifts directly by

keys without suspend processing.

8. Support adjust speed ratio during operation. To adjust the speed ratio so as to change

the processing speed and travel speed, speed ratio values from 0.1-1. Increasing or

decreasing 0.1 per time.

9. Simple manual operate mode. In manual mode, the system provides 3 kinds of move

modes, including continuous, step (crawl), distance, become more simple and

convenient.

10. Identifies M code, F code and other extended instructions, and it can also open a

special code based on user‟s needs.

11. Built-in 512 M memory. Adapt USB communication port with high efficiency for file

transfer. Can read files in U disk and card reader directly.

12. Unique handheld structure which can be hold with one hand. With LCD display and

Содержание AutoNow F141



































































Результаты поиска

Содержание AutoNow F141

Отзывы:

Похожие инструкции для AutoNow F141

Бренды по названию

Популярные бренды

RichAuto AutoNow F141, Руководство пользователя

Результаты поиска

Содержание AutoNow F141

Отзывы:

Похожие инструкции для AutoNow F141

Бренды по названию

Популярные бренды