If the wheelchair can recline, the WPAC must be positioned outside
of the wheelchair’s reclining motion.
Connection cords should be secured as neatly and tightly as
possible. This prevents any loose cords from “snagging” while the
chair is in operation.
Installation
Step 1 Plug the Input/Power cable into the Joystick Charging
Port.
Step 2 Run the cable to the position where you want to mount
the WPAC.
Step 3 Tidy up all excess slack and loose wire. Be Neat!
Step 4 Plug the Input/Power cable into the WPAC.
Step 5 Verify that the light on the Input panel of the WPAC
turns green.
Step 6 Connect the Output/Device cable to your DynaVox
device.
Step 7 Plug the Output/Device cable into the WPAC.
Step 8 Verify that the light on the Output panel of the WPAC
begins blinking green.
Step 9 Verify that the Power Indicator and the Charging
Indicator on your DynaVox device are both on.
