CASE
The design and execution of the watch demonstrates a complete conceptual approach to the movement, case and dial.
As a result, everything has been constructed according to an extremely rigorous specifications, in the manner of the
analytical engineering methods used in the design of Formula 1 racing cars where the chassis and the engine are
developed in complete harmony.
The in-house CRMA1 is highlighted by the combination of unique materials such as red gold for the caseband and TZP
black ceramic for the bezel and the caseback. It is particularly resistant to knocks and scratches and undergoes a long
production process which results in a final matt surface finish. The caseband is in satin 5N red gold with polished pillars.
The RM 037 is available in TPZ black ceramic, in ATZ white ceramic and in white or red gold.
The three-part case is rendered water resistant to 50 meters ensured by two Nitril O-ring seals. It is assembled using
20 grade 5 titanium spline screws and abrasion-resistant washers in 316L stainless steel.
NEW PATENTED STEM-CROWN CONSTRUCTION
This designed crown allows the integrity of the movement to be fully guaranteed and protected from external influences,
since it does not use a classical crown attachment going into the depth of the movement’s heart. The result is that the
crown is virtually impossible to
dislodge and yet it is easily inserted and removed under the skillful hands of the watchmaker when needed; a typical view
towards longevity that typifies the brand’s philosophy. An ideal solution for the long-term protection of the movement.
SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE CASE
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected
by physical manipulation during assembly or disassembly and age well.
UPPER FLANGE
In carbon fiber; index points filled with approved luminous material.
CRYSTAL
Bezel side: in sapphire (1,800 Vickers) with anti-glare treatment (2 sides).
Thickness: 1.60 mm
Case back: in sapphire with anti-glare treatment (2 sides)
Thickness: at the center 0.95 mm and outer edges 1.66 mm
