23
4.3.2 Form
Feed
Switch 1-7
controls form feed direction. When set on, this switch causes the SP2200 to reverse the feed direc-
tion, pulling forms from the rear of the printer toward the front.
4.3.3 Eat <LF> after <CR>
Switch 2-1
is used in standard input mode to convert double-spaced data to a single-spaced format. If the host
device sends an ASCII carriage return (CR, hex 0D, decimal 13) fol lowed by a line feed (LF, hex 0A, decimal
10), setting this switch on causes the printer to ignore the line feed control code.
4.3.4 Double
Strike
Switch 2-3,
when set on, causes the printer to double-strike the printed characters. Use this function to specify
darker print on multicopy forms and forms with weak carbon layers.
4.3.5 Time and Date Printing
Switches 2-4 and 2-5
are used to specify where the time and date information is printed on the ticket. These
switches are used only if the time and date option is installed. Table 4-4 shows the switch com bi na tions used
to select where the time and date in for ma tion is positioned on the ticket.
2-4
2-5
Time & Date Printing
0 0 Off
0 1 Print
fi rst
1 0 Print
last
1
1
Print after units
Table 4-4. Time and date printing switches
4.3.6 Time and Date Format
Switch 2-6
selects whether the time and date are printed in in ter na tion al (0) or US (1) format. See Section 4.5
for more in for ma tion about time and date formats.
4.3.7 Paper
Sensor
Switch 2-7
turns the paper sensor off (0) and on (1). If the paper sensor is turned on and there is no form in
the printer, the red FORM OUT LED will light and the printer will not attempt to print information sent to it.
4.3.1 Font
Selection
Switches 1-4, 1-5, and 1-6
are used to select the size and
orientation of the characters printed by the SP2200. Characters
can be printed at the normal size (5x9 ma trix), double height,
double width, or double height and width. Characters can also
be inverted (printed upside down) for use with applications us-
ing reverse form feed. Table 4-3 shows the switch settings used
to select the various printer fonts.
1-4 1-5 1-6 Fonts
0 0 0
Normal
0 0 1
Inverted
(I)
0 1 0
2xWidth
(2W)
0 1 1
2xHeight
(2H)
1
0
0
2H & I
1
0
1
2W & I
1
1
0
2H & 2W
1
1
1
2H & 2W & I
Table 4-3. Font selection switches
S1
S2
S3
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Double Strike
Font Selection
Form Feed
Eat <CR>
{
{
Time and Date Printing
Time and Date Format
Paper Sensor
OFF = 0
ON = 1
Figure 4-6. DIP switches used to set printer mode
