Rice Lake SCT-3300, Руководство по установке

Страница: 5 / 14

Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 1
1.0 Introduction
This manual is intended for use by service technicians responsible for installing and servicing SCT-3300 Signal Conditioning
Transmitters/Indicators.
This instrument must not be opened by the user. Any attempt to repair or alter the unit can expose the user to
the danger of electric shock and will void the warranty. If a problem with the unit or system is experienced,
please notify the manufacturer or the dealer.
1.1 Safety
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or corruption
to and loss of data.
General Safety
Do not operate or work on this equipment unless this manual has been read and all instructions are understood.
Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake
Weighing Systems dealer for replacement manuals.
Failure to heed could result in serious injury or death.
Electric shock hazard!
Do not install in areas subject to explosion hazard.
There are no user serviceable parts. Refer to qualified service personnel for service.
Always disconnect from main power before performing any work on the device.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without all shields and guards in place.
Do not use for purposes other then weighing applications.
Do not place fingers into slots or possible pinch points.
Do not use this product if any of the components are cracked.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Do not use near water.
Failure to follow could result in damage to equipment or corruption to and loss of data.
Keep away from heat sources and direct sunlight.
Protect the instrument from environmental factors: rain, snow, dust, etc.
Clean the instrument with a damp cloth, do not use anything but water
Always mount the instrument and platform in a vibration free setting.
All instrument connections must be made with respect to local zone and environment standards.
IMPORTANT
DANGER
WARNING
CAUTION
IMPORTANT
WARNING
IMPORTANT