Rice Lake RL-MPS-40, Руководство по эксплуатации

Страница: 7 / 16

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.1 Scale Assembly
The following tools are required to assemble the RL-MPS-40. Use the following sections to assemble the scale.
• Phillips head screwdriver
• Wrench (included)
2.1.1 Pillar Installation
1. Set the scale base on a hard level surface.
2. Remove the ties from the scale base and the cable tie that holds the steelyard rod from shifting during shipping.
Figure 2-2. Remove Ties
3. Insert the pillar into the scale base assembly ensuring that the smaller face of the weight beam faces the scale base.
Figure 2-3. Install Pillar
4. Secure the pillar to the scale base using a Phillips head screwdriver and eight bolts with washers.
Figure 2-4. Secure Pillar to Scale Base
Scale Base Ties
Cable Tie
Pillar - Small Face
Scale Base