Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 32 / 80

680 Synergy Plus – Digital Weight Indicator
26 Visit our website www.RiceLake.com
4.4.2 Setup – Format Menu
4.4.2.1 Primary and Secondary Menus
Figure 4-6. Format – Primary and Secondary Menus
4.4.3 Setup – Calibration Menu
Figure 4-7. Setup – Calibration Menu
Parameter Description
format
Format – Sets the decimal point and the display divisions for the Primary (
primar
) and Secondary (
secndr
)
display weight format; For example, select 8888.885 if a count by of 0.005 is needed or select 8888820 if a count by
of 20 is needed (the 8 s serve as placeholders and show a breakdown of how digits will display);
Settings: 8888881 (Primary default), 8888882, 8888885, 8888810, 8888820, 8888850, 8888100, 8888200,
8888500, 8.888881, 8.888882, 8.8888885, 88.88881, 88.88882, 88.88885, 888.8881, 888.8882, 888.8885,
8888.881, 8888.882, 8888.885, 88888.81, 88888.82, 88888.85, 888888.1, 888888.2, 888888.5 (Secondary default)
Units
Units – Sets the units type; Settings: LB (Primary default), KG (Secondary default), OZ, TN, T, G, NONE
Enabled
Enabled – Enables the front panel UNITS button to toggle between the primary and secondary formats (only
displays under Secondary); Settings: ON (default), OFF
Table 4-5. Format – Primary and Secondary Menu Parameters
Parameter Description
wzero
Zero Calibration – Executes the zero calibration process; See Section 5.1 on page 40
zerocnt
Zero Calibration Count – Displays the raw count value at the zero weight; A zero calibration (WZERO)
generates this raw count value; Manually changing this count value changes the zero weight and negates the
zero calibration
wval
Test Weight Value – Sets the weight value for the span calibration; See Section 5.1 on page 40 ;
Enter value: 0.000001–9999999.999999, 10000.0 (default)
wspan
Span Calibration – Executes the span calibration process; See Section 5.1.1 on page 40
spancnt
Span Calibration Count – Displays the raw count value at the span weight; A span calibration (WSPAN)
generates this raw count value; Manually changing this count value changes the span weight and negates the
span calibration
Table 4-6. Setup – Calibration Menu Parameter
Setup
Format
FORMAT UNITS
PRIMAR
FORMAT UNITS ENABLED
SECNDR
Setup
Calibr
zerocnt WZERO WVAL spancnt WSPAN
Point 1-4
WLIN REZERO
Wlin v1-4 wlin c1-4 wlin f1-4
lstzero tmpzero