Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 21 / 80

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 15
3.2 LED Annunciators
The 680 display uses a set of eight LED annunciators to provide additional information about the value being displayed.
3.3 General Navigation
The front panel scale function buttons are also used to navigate through the menu structure.
• and move left and right (horizontally) in a menu level
• and move up and down to different menu levels
• enters a menu or parameter and selects/saves parameter settings or values
• to access user mode, to leave a parameter without making changes, or to return to weigh mode
• Use the numeric keypad to enter a value and press to accept the value ( Section 3.3.1 )
3.3.1 Numeric Value Entry
Several parameters in the menu structure require the entry of a numeric value rather than the making of a selection.
Follow this procedure to enter a numeric value:
1. Press or to enter into a parameter. The current parameter value displays.
2. Press to clear the current value.
3. Use the numeric keypad to enter a new value.
4. If necessary, press
to make the value negative.
5. Press to save the new value. The next parameter in the menu displays.
Pressing also saves the new value, but the indicator returns up to the current parameter, rather than to the
next parameter in the menu.
LED Description
Gross
Brutto
Gross/Brutto LED – Gross weight display mode (or Brutto in OIML mode)
Net Net LED – Net weight display mode
The Center of Zero LED – Indicates the current gross weight reading is /- 0.25 display divisions of the acquired zero, or is within
the center of zero band; A display division is the resolution of the displayed weight value, or the smallest incremental increase or
decrease which can be displayed or printed
Standstill LED – Scale is at standstill or within the specified motion band; Some operations, including zero, tare and print, can only be
done when the standstill LED is on
lb
lb and kg LEDs:
Displays which unit of measure is being used; lb and kg annunciators indicate the units associated with the displayed value;
The displayed units can also be set to short tons (tn), metric tons (t), ounces (oz), grams (g) or none (no units information displayed);
The lb and kg LEDs function as primary and secondary units annunciators; If neither primary nor secondary units are lb or kg, the lb
annunciator is lit for primary units and kg is lit for secondary units
kg
T Tare LED – Indicates a push-button tare weight has been acquired and stored in memory
PT Preset Tare LED – Indicates a preset tare weight has been keyed in or entered and stored in memory
Table 3-2. LED Annunciators
Note