Rice Lake MSI Dyna-Clamp, Руководство по эксплуатации, Страница: 6 / 20

MSI Dyna-Clamp Tension Meter
2 Visit our website www.RiceLake.com
1.2 Display
The front panel consists of a two-line, LCD display with four LED annunciators and four keys. This section provides a detailed
description of what is featured on the display and the key functions.
Figure 1-1. Dyna-Clamp Front Panel
Wire Rope Examples:
Below are two examples of how wire rope types appear on the Dyna-Clamp display. The diameter of the wire rope type displays
first, followed by the wire rope class.
Wire Rope Diameter = 3/4'' | Wire Rope Class = 6x36 Wire Rope Diameter = 1/2'' | Wire Rope Class = 8x19
Item No. Description
1 Power Key – powers the Dyna-Clamp on and off; in setup mode, it returns the unit to tension display without saving settings
2 Zero Key– zeros out the residual tension on the link; in setup mode, it saves settings and drops back one menu level
3 F1 Key – programmable to user functions ( Section 3.3 on page 7 )
4 F2 Key – programmable to user functions ( Section 3.3 on page 7 )
5 Low Battery – displays when approximately 10% of battery life remains and blinks when automatic shutdown is imminent
6 Primary display with six 0.7'' (18 mm) numeric digits; displays live wire rope tension and is sunlight visible
7 Secondary display with eight 0.5'' (13mm) numeric digits; displays wire rope diameter, average tension and peak tension
8 Average Function – indicates the average function is currently displaying on the secondary (top) display line; displays the
running average tension measurement ( Section 2.7 on page 5 )
9 Peak Function – indicates the peak function is currently displaying on the secondary (top) display line; displays the greatest
tension that has been measured ( Section 2.8 on page 5 )
10 Kilonewton – indicates the tension display is in kilonewtons
11 Pound-force – indicates the tension display is in pounds
12 Kilogram-force – indicates the tension display is in kilograms
13 Setpoint/Range LEDs – indicates if tension measurements are outside of the programmable range
14 F-Key LEDs – not currently supported
Table 1-1. Key Descriptions
MSI DYNA-CLAMP
USER KEYS
ZERO
POWER
F1
F2
Measurement Systems
International
F1 F2
SETPOINTS
1 2
14
13
8
9
10
11
12
1
2
3
4
7
6
5