Rice Lake Master BS211, Руководство по установке

Страница: 6 / 15

Introduction 1
1.0 Introduction
A belt scale measures a continuous mass flow, which is transported over a belt conveyor. A complete belt scale is
composed of a weighframe, which contains one or more load cells, a speed pickup and the Integrator electronics
(see drawing WBF-S0000).
Not every application is suited for a belt scale, this has to be analyzed by a Rice Lake Weighing Systems specialist.
A series of weighframes have been developed for a number of applications and for every type of conveyor, to
achieve the optimum result.
The
Master
BS211
Belt Scale System must be installed by qualified service technicians only, according to this
manual.
This manual can be viewed and downloaded from the Rice Lake Weighing Systems website at
www.ricelake.eu
.
1.1 Safety
Safety Symbol Definitions:
Important
CAUTION
WARNING
DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided could result in death or serious injury, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
General Safety
WARNING
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your
responsibility.
Failure to heed may result in serious injury of death.
Some procedures described in this manual require work inside the enclosure. These procedures are to be performed by
qualified service personnel only.
Take all necessary safety precautions when installing the scale carriage including wearing safety shoes, protective eye
wear, and using the proper tools.
Keep hands, feet and loose clothing away from moving parts.
DO NOT approach a running conveyor from underneath.
DO NOT bend over a running conveyor.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT jump on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
DO NOT use near water.