LaserLight3 Remote Display Operator Quick Reference Guide
4
Visit our website
Menu and Text Editable Parameter
Figure 5. Text Editable Menu Example
Software Functions
This section provides procedures for basic LaserLight3 software functions.
NOTE: Additional functions available if Setup mode is enabled. For more information, see LaserLight3 Remote Display
Technical Manual (PN 214748).
Edit Time Value
Select Time in the top-level menu to edit the time.
Figure 6. Time Parameter Menu Path
1. Navigate to
Setup ► ... ► Time
.
2. Press
to set the time.
3. To edit the time value:
• Press
and
to select characters
• Press
and
to edit the underlined character
4. Press
. OK displays.
5. Press
then
to exit the menu.
NOTE: Time is backed up by the internal battery and is not lost if the main power is interrupted. For more information, see
LaserLight3 Remote Display Technical Manual (PN 214748).
Number
Element
Description
1
Red Font
Red font appears in two scenarios:
• In center column to indicate selected menus and parameters
• On left or right sides to indicate available menus, options or parameters
2
White Font with
Blinking Cyan
Underline
Indicates a text configured parameter. Move character selection (cyan underline) with
and
.
Press
and
to change characters
Hold
to delete a character or hold
to insert a 0 character
Press
to confirm character configuration and return to the previous menu
Table 5. Text Editable Menu Element Descriptions
Time
10/08/22
MM/DD/YY
Date
Version
1
2
Setup
Test
MAC ID
Time
MENU
