Rice Lake iRev 920i, Руководство по установке, Страница: 96 / 101

92
920i
Installation Manual
10.9 Conversion Factors for Secondary Units
The
920i
has the capability to mathematically convert a weight into many different types of units and instantly
display those results with a press of the
UNITS
key.
Secondary and tertiary units can be speciÞed on the FORMAT menu using the SECNDR and TERTIA
parameters, or by using serial commands.
¥ To conÞgure secondary or tertiary units using the front panel menus, use the Table 10-9 to Þnd the
conversion multiplier for the MULT parameter. For example, if the primary unit is pounds and the
secondary unit is short tons, set the MULT parameter to 0.000500.
¥ To conÞgure secondary or tertiary units using serial commands, use the Table 10-9 to Þnd the conversion
multiplier for the SC.SEC.MULT or SC.TER.MULT command. For example, if the primary unit is
pounds and the secondary unit is short tons, send the serial command SC.SEC.MULT= 0.0005<CR> to
set the multiplier for the secondary units.
NOTE:
Ensure that the secondary decimal point position is set appropriately for the scale capacity in the
secondary units. If the converted value requires more digits than are available, the indicator will display an
overßow message (
OVERFL
).
For example, if the primary units are short tons, secondary units are pounds, and the secondary decimal point is
set to 8888.888, the indicator will overßow if 5 tons or more are applied to the scale. With 5 tons applied, and a
conversion factor of 2000, the secondary units display needs Þve digits to the left of the decimal point to display
the 10000 lb secondary units value.
Primary Unit x Multiplier
Secondary/
Tertiary Unit
grains 0.064799 grams
0.002286 ounces
0.000143 pounds
0.000065 kilograms
0.002083 troy ounces
0.000174 troy pounds
ounces 437.500 grains
28.3495 grams
0.06250 pounds
0.02835 kilograms
0.911458 troy ounces
0.075955 troy pounds
pounds 7000.00 grains
453.592 grams
16.0000 ounces
0.453592 kilograms
14.58333 troy ounces
1.215278 troy pounds
0.000500 short tons
0.000446 long tons
0.000453 metric tons
Table 10-9. Conversion Factors
grams 15.4324 grains
0.035274 ounces
0.002205 pounds
0.001000 kilograms
0.032151 troy ounces
0.002679 troy pounds
kilograms 15432.4 grains
35.2740 ounces
1000.00 grams
2.20462 pounds
32.15075 troy ounces
2.679229 troy pounds
0.001102 short tons
0.000984 long tons
0.001000 metric tons
short tons 2000.00 pounds
907.185 kilograms
0.892857 long tons
0.907185 metric tons
metric tons 2204.62 pounds
1000.00 kilograms
1.10231 short tons
0.984207 long tons
Primary Unit x Multiplier
Secondary/
Tertiary Unit
Table 10-9. Conversion Factors (Continued)