Rice Lake iRev 920i, Руководство по установке, Страница: 51 / 101

Truck Modes 47
7.0 Truck Modes
The truck in/out modes are used to handle multiple
truck ID numbers and weights. Six truck modes
combine stored ID, keyed tare, and value swapping
features in various ways:
Stored IDs
let you keep a database of truck IDs and
weigh-in weights in the indicatorÕs memory. The
indicator can automatically store up to 1000 truck IDs
and tares; or it can clear the information after printing
a weigh-out ticket. For example, if the same truck
seldom crosses the scale, it may not be practical to
save its ID number and weigh-in weight. However, if
that same truck crosses the scale many times each day,
itÕs more convenient to store the information in the
indicator memory and recall it when needed. Stored
IDs and weights are available in Modes 3, 4, 5, and 6.
Keyed tares
allow you to manually enter the tare
weight using the numeric keypad and the
TARE
key.
Keyed tares are available in Modes 1, 3, and 5. To use
keyed tares, an incoming truck must be empty at
weigh-in, full at weigh-out.
NOTE:
Some local regulations require the tare weight
to be read from the scale. If so, donÕt use the keyed
tares feature.
Value swapping
ensures that the lowest of two
weight values associated with a particular ID number
is entered as the tare weight. For example, if a truck
crosses the scale fully loaded at weigh-in, then
unloads and crosses the scale empty at weigh-out, the
indicator automatically assigns the lesser (empty
truck) weight as the tare. Value swapping is available
in Modes 1, 2, 3, and 4.
7.1 Using the Truck Modes
To select a truck in/out mode, press the setup switch to
enter setup mode. Use the navigation keys to go to the
FEATURE menu, then to the TRUCK submenu to
select the mode.
Next, go
right
to the SOFTKEYS submenu and
conÞgure the
Weigh In
,
Weigh Out
, and
Truck Regs
softkeys. These keys are required when using the
truck modes.
Figure 7-1.
920i
Display, showing Truck Mode Softkeys
7.2 Using the Truck Regs Display
The Truck Regs display is shown by pressing the
Truck Regs softkey in weighing mode. The display
contains an alphabetical list of stored truck IDs,
weigh-in weights (in primary units), and the time and
date of the weigh-in transaction (see Figure 7-2).
Figure 7-2. Truck Register Display
Softkeys shown at the bottom of the Truck Regs
display are described below.
Page Up
Shows previous page of the truck
register.
Page Down
Shows next page of the truck register.
Cancel
Exits to weighing mode.
Delete
Deletes the highlighted truck ID from
the truck register.
Delete All
Deletes all truck IDs from the truck
register.
Mode Stored IDs Keyed Tares
Value
Swapping
MODE1 NO YES YES
MODE2 NO NO YES
MODE3 YES YES YES
MODE4 YES NO YES
MODE5 YES YES NO
MODE6 YES NO NO
OFF
Table 7-1. Truck Mode Features