Rice Lake EZ Mount Скачать руководство пользователя страница 6

EZ Mount Load Cell Mounting Kit

2

Visit our website

 

www.RiceLake.com

1.1

Safety

Safety Signal Definitions:

Indicates an imminently hazardous situation that, if not avoided, 
will result in death or serious injury. Includes hazards that are 
exposed when guards are removed.

Indicates a potentially hazardous situation that, if not avoided 
could result in serious injury or death. Includes hazards that are 
exposed when guards are removed.

Indicates a potentially hazardous situation that, if not avoided, 
could result in minor or moderate injury.

Indicates information about procedures that, if not observed, 
could result in damage to equipment or corruption to and loss of 
data.

General Safety

Do not operate or work on this equipment unless this manual has been 
read and all instructions are understood. Contact any Rice Lake 
Weighing Systems dealer for replacement manuals. 

Failure to heed may result in serious injury or death.

Do not use for purposes other than weight measurement.

Do not use any load-bearing component that is worn beyond 5% of the original 
dimension.

Do not use this product if any of the components are cracked.

Do not exceed the rated load limit of the unit.

Do not make alterations or modifications to the unit.

  

WARNING

CAUTION

IMPORTANT

WARNING

Содержание EZ Mount





















Отзывы: