CLS Series Wired to Wireless Conversion Instructions
4
Visit our website
Installing the Angle Cover Plate and Battery Box Assembly
To install the angle cover plate and battery box assembly:
1. Attach pigtail from angle cover plate and battery box assembly to junction box.
2. Secure angle cover plate and battery box assembly to top of carriage.
3. Install battery.
4. Following for battery option.
Figure 4. Battery Box
Wireless Battery Option
Wireless technology eliminates the need for the coiled interface cable. The reinforced battery box is welded onto the cover
plate. There is an On/Off switch to conserve the life of the battery and an LED to indicate when the battery is on. Battery life is
approximately 24 hours of continuous use, with only eight hours to fully charge.
The wireless technology operates using a paired set of IEEE 802.15.4 wireless modules. It operates in unlicensed bands
including 2.4 GHz, 900MHz and 868 MHz. One module is in the battery angle bracket assembly, the other is in the wireless
junction box connected to the indicator.
If multiple units are being installed, make a note of the original components supplied on each pallet. They will only operate in
combination with each other.
Figure 5. Wireless Battery Option
LED indicates On/Off
Antenna
On/Off Switch
