CLS-M Installation Manual
3
Side Shift Components
It is important to provide coverage against side shifting of the scale when it is attached to the forklift mast.
Coverage should extend past the scale enough to stop any shifting.
Check the existing components, if any, to make sure the provide adequate coverage.
Worn washer does not
prevent side shift.
Figure 2. Worn forklift side shift bolt and washer
Welded Washer
provides protection
from side shifting.
More coverage of
the scale would be
preferable.
Note
The side shift bolt and washer that are attached to forklift mast (Figure 2), appears to be worn and does
not have a large enough washer to provide protection from shifting of unit.
•
Replace existing components with new components that will provide the appropriate cover to keep it
from side shifting.
•
If none currently exist, install appropriate components.
Figure 3. Welded Washer to Prevent Side Shifting
Note
A washer has been welded to the mast of the forklift (Figure 3) to provide protection from side shifting of
unit. More coverage of the scale would be preferred.
