Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 9 / 46

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 5
2.3 Tare
Tare is used to zero out a known weight, such as a packing container or pallet, and display a NET weight. The TARE function is
defined as a Tare-In or Tare-Out operation.
To tare the scale:
1. Hang the empty container from the scale.
2. Press
to enter a tare value. The MSI-3460 stores the current weight as a tare value and subtracts the value of
the container from the gross weight.

displays and the weight mode changes to NET .
3. Add the product to the packing container. The NET weight is displayed.
2.3.1 View Tare
To view the gross weight without clearing the tare value:
1. Program to the NET/GROSS function ( Section 4.2 on page 10 ).
2. Press , to toggle between net and gross values. This will only work if a tare value has been established.
The backup memory in the MSI-3460 stores the Tare reading and can restore it even if power fails.
Only positive gross weight readings can be tared. The motion annunciator must be off, indicating weight reading is
stable. Setting or changing the tare has no effect on the gross zero setting. Taring will reduce the apparent over
range of the scale. The RF Remote Control has a Net/Gross permanently available.
Example: Taring a 100 lb container on a 1000 lb scale, the scale will overload at a net weight of 900 lb (1000-100)
plus any additional allowed overload (usually 4% or 9d).
2.3.2 Clear Tare
To clear a saved tare value, press . The GROSS weight displays.
TARE
USER
F
USER
F
Note
TARE