Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 7 / 46

Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 3
1.5 MSI-3460 Front Panel
Figure 1-1. MSI-3460 Front Panel
Keys
Annunciators
Item No. Key/LED Description
1 Turns the unit on and off;
When the indicator is in setup mode, cancels action and returns to prior level without saving
2 Used to zero out residual weight on the scale;
In setup mode, stores changes and returns to the prior level
3 Removes weight of containers, trucks, or carriers and places the scale in the Net weight mode functions as tare in, tare out;
To view gross weight without resetting the tare value, program the USER key as NET/GROSS
4 Programmable to user-selectable functions ( Section 4.0 on page 9 ); Defaulted is TEST
Table 1-1. Key Descriptions
Item No. Key/LED Description
5 MOTION Indicates the weight has not settled within the stable window; When lit, scale will not zero, tare or total
6 SETPOINTS User-programmable setpoints for early overload warnings; Blue LED - Setpoint 1 and 2 Red LED - Setpoint 3
7 Center-of-Zero – Indicates the weight is within 1/4 d of zero
8 ACK Acknowledge LEDs are used to provide feedback to the operator;
• Blue LED - Incoming remote commands have been received;
• Red LED - Lights momentarily when enabled; Lights to acknowledge Auto-Total operation
9 RF Indicates carrier detect for RF remote display equipped unit; An illuminated LED indicates the MSI-3460 and remote display are
linked; On units equipped with the RF remote control, the LED is illuminated for a half second when a remote command is received
10 LO BATT Displays when approximately 10% of battery life remains, blinks when automatic shutdown is imminent
11 X1000 Used with TOTAL LED, allows accumulation of weight beyond the five digit display capacity
12 TOTAL Indicates scale is displaying the Total weight; This is a temporary display lasting less than five seconds
13 GROSS Indicates the scale is in the Gross weight mode; All hook weight is displayed minus any zero offset
14 NET Indicates the scale is in Net weight mode; A tare weight is subtracted from the gross weight
15 PEAK Indicates the scale is in peak hold mode
16 kg Indicates weight display is in kilograms
17 lb Indicates weight display is in pounds
18 ----- 5-Digit 1.5''/3.8 mm high brightness LED weight display
19 ----- Light sensor for auto brightness control
20 ----- Calibration button under wire seal-able calibration port
Table 1-2. Annunciator Descriptions
Measurement Systems International
NET GROSS X1000 TOTAL
ACK
LO BATT
PEAK
RF
MOTION
POWER ZERO TARE USER
F
CAL
SET
POINTS
1 2 3
kg
lb
Seattle, Washington U.S.A.
MSI-3460
Model No.
5
6
7 8 9
10
11 12 13 14 15
16 17
1
2 3 4
18
19
20
POWER
ZERO
TARE
USER
F
0