Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 29 / 46

Communications
© Rice Lake Weighing Systems ● All Rights Reserved 25
Combinations of the standard print strings can be entered in the string number entry screen.
Example: To get a NET, GROSS, TARE printout with a space between records, enter 2349.
The ScaleCore Connect software can also be used to create custom output strings with a combination of standard print string
commands ( Table 6-2 ). ScaleCore Connect can be downloaded from
www.ricelake.com
.
The serial output is configured as 9600 baud, Xon/Xoff handshaking, no hardware handshaking, 1 stop bit, no parity. Other
baud rates are possible by special order only.
6.1.2 Control Modes
The user can select three control modes which are described in Table 6-4 .
6 Number of Samples Totaled Fixed output length: 16. Leading zeros suppressed except for the LSD;
<SP><SP><SP><SP><SP><SP><SSSSSSS><SP><T-CNT>SP>CRLF>
7 Current Weight Mode Net, Gross, Peak, etc;
<SP><MMMMM>CRLF>
8/9 Carriage Return/Line Feed Used to add a space between print records;
<CRLF>
Command Description
<T> Load data
<U> Units
<M> Load mode (lb/kg)
<CRLF> Carriage return line feed
<SP> Space
Table 6-3. Standard Print Strings Commands
Mode Description

Printing is controlled by the operator using . if set to Print mode;
If using a remote device, there may be a dedicated PRINT key ( F-key 3 ) available

One print occurs when a stable load is read. The scale must then return to near zero before another print will occur;
Note: Other configurations of loads are available using the ScaleCore Connect software. It can be downloaded from www.ricelake.com

The MSI-3460 will continuously output the data at a rate specified in the rate parameter (up to 65,535 seconds); Setting the interval to 0
will set an interval as fast as the system can go

Printing is disabled. Power consumption is lower with the print off
Table 6-4. Control Modes
Table 6-2. Standard Print Strings (Continued)
USER
F