Veterinary/Platform Scale Operation Instructions - Scale Assembly
3
Battery Charging
When the AC adaptor is connected to a power source, the rechargeable battery goes into recharge mode.
NOTE:
To maintain battery longevity we recommend you charge it on a regular basis rather than waiting until it is fully
discharged.
The LED indicator light on the back of the scale housing will illuminate red during the charging period, and
change over to green when the battery becomes fully charged.
Load Cell Connections
When you receive your scale, the supplied load cell cable must be connected to the indicator and plugged into the
load cell connection point.
To gain access to the load cell connection point, remove the four back retaining screws as shown in Figure 2-1.
Figure 2-2 illustrates where the load cell connection point is.
Load Cell Connection
Point
Figure 2-2. Load Cell Connection Point
2.5
Getting Ready to Weigh a Patient
Once the scale is properly unpacked and set up, and prior to weighing a patient, step on the scale to check the
scale that all functions are working correctly. The scale is calibrated from the factory so simply turn on the scale
and step on the scale to get a weight reading. Press the
REWEIGH
key again to verify that weight.
Figure 2-3. Press the Reweigh Key to Verify Weight
