Rice Lake 380 Synergy, Техническое руководство

Страница: 26 / 60

380 Synergy Digital Weight Indicator
20 Visit our website www.RiceLake.com
4.0 Configuration
There are two types of configuration parameters in the 380, setup mode parameters (or Legal for Trade configuration) and user
mode parameters (or non-legal configuration).
• The User mode can be accessed by pressing for five seconds. User mode includes all menus in this section other
than the setup menu.
• The Setup mode parameters are accessed by pressing momentarily during the startup sequence. All menus in
this section can be accessed from within Setup mode.
CAL jumper must be removed to access Setup mode parameters ( Section 4.1.1 on page 21 ).
The following sections provide graphic representations of the 380 menu structures. Most menu diagrams are accompanied by a
table which describes all parameters and parameter values associated with the menu. The factory default setting appears in
bold type.
A ll weight related parameters must be configured prior to calibrating the unit.
4.1 Sealing the Indicator (Optional)
Insert a lead wire seal through two drilled cheese head screws and the hole in the lower side of the front plate. This restricts
access of the CAL jumper, electronics, electrical contacts and Legal for Trade configuration parameters.
CAL jumper must be in place before sealing faceplate to prevent access to Setup mode
at startup ( Figure 4-2 on page 21 ).
Figure 4-1. Sealing the Indicator – No Access
1. Torque the four front plate screws to 10 in-lb (1.7 N-m).
2. Navigate the sealing wire through the lower two fillister head screws on the front plate and the hole at the bottom
center of the front plate, as shown in Figure 4-1 .
3. Seal the wire to secure.
ZERO
ZERO
Note
Note
Note