9
Turning On the Power Nozzle
The power nozzle can only be turned on
if the canister is also turned on (canister
on / off switch is located on the main body).
The power nozzle on / off switch is located
on the handle. Simply press the switch
forward to engage the power nozzle.
Using the Power Nozzle
After turning on the canister and power
nozzle, lower the wand by pressing the left
pedal on the back side of the power nozzle.
Removing and Inserting the Wand
Removing the wand from the power nozzle
allows you to use cleaning tools for baseboard
or above-the-floor cleaning. To do this, first
turn the power nozzle and canister off. Then,
press the wand release collar pictured below
and pull the wand out.
To reinsert the wand into the power nozzle,
simply press the wand back into the neck of
the power nozzle. The wand will then “click”
into place.
Carpet Height Adjustment
Your power nozzle has six different settings
to clean a variety of carpet types and floor
surfaces. To adjust the carpet height setting
of the power nozzle, press the right pedal
located on the back of the power nozzle.
Each press of this pedal will adjust the height
to the next carpet height position.
To determine which setting you are currently
on, look through the height indicator window
on the top of the unit. You will see one of the
six settings detailed below:
Setting: Intended Use:
1. XHI
Very plush carpet
2. HI
Plush carpet
3. Auto
General carpet thickness
or bare floors
4. MED
Medium pile carpet
5. LO
Low pile carpet
6. XLO
Indoor/Outdoor carpet
Using the Full Size Power Nozzle
