Riccar Immaculate, Руководство пользователя

Страница: 5 / 9

8 9
Description Continued
Using the Power Nozzle
After turning on the canister, lower the wand
by pressing the left pedal on the back side of
the power nozzle.
Turning On the Power Nozzle
The power nozzle on/off button is located on
the handle. Simply press the Power Brush
button to turn on the canister and engage the
power nozzle.
Removing and Inserting the Wand
Removing the wand from the power nozzle
allows you to use cleaning tools for baseboard
or ceiling cleaning. To do this, first turn the
power nozzle and canister off. Then, press
the wand release collar pictured below and
pull the wand out.
To reinsert the wand into the power nozzle,
simply press the wand back into the neck of
the power nozzle. The wand will then “click”
into place.
Carpet Height Adjustment
Your power nozzle has six different settings
to clean a variety of carpet types and floor
surfaces. To adjust the carpet height setting
of the power nozzle, press the right pedal
located on the back of the power nozzle.
Each press of this pedal will adjust the height
to the next carpet height position.
To determine which setting you are currently
on, look through the height indicator window
on the top of the unit. You will see one of the
six settings detailed below:
Setting: Intended Use:
1. XHI Very plush carpet
2. HI Plush carpet
3. Auto General carpet thickness
or bare floors
4. MED Medium pile carpet
5. LO Low pile carpet
6. XLO Indoor/outdoor carpet
Using the Full Size Power Nozzle
Power Nozzle
Handle Release Pedal
Brushroll Jam/Dirt Sensor Warning Light
(Immaculate Model only)
Power Nozzle
Telescopic Wand
On/Off Control
Xenon Headlight
Telescopic Wand
Handle
Wand Extension Grip
(to extend wand)
Wand Release Collar
(to remove wand from power nozzle)
Wand Release Collar
(to remove wand from power nozzle)
Height Indicator Window
Height Adjustment Pedal
Circuit Breaker Switch
Handle
Soft Furniture Guard
Wand Release Button
Wand Extension Grip
(to extend wand)