Directly Recording from the In-In Radio
1. Set the Function Selector to the RADIO position.
2. Turn in the radio station you want to record.
3. Insert a blank cassette into the tape compartment.
4. Press the Record button, Play button will be pressed automatically and recording starts.
5.Direct recording will continue until the STOP or PAUSE button is pressed, or until the tape reaches the
end.
Care and Maintenance
TO ensure optimum performance from your unit, keep the tape inside clean. To clean the tape
path, open the cassette door. Moisten a cotton swab with isopropyl alcohol or special tape head
cleaning fluid. Remove any excess alcohol front the swab. Clean the tape head, capstan and pinch
roller. Avoid scratching the head surface. To clean the unit housing, use a soft damp cloth. After
cleaning, wipe the unit surface with a dry cloth.
Caution: Never use chemicals such as benzene or paint thinner for cleaning; otherwise, the case
may be deformed or discolored.
Keep magnets and metallic objects away from the tape head. If the bead becomes magnetized,
noise will increase and the tone will deteriorate possible damage from battery corrosion.
Troubleshooting
Check The Following Guide For Problem Resolution
SYMPTOM
CAUSE
SOLUTION
Tape fails to
move
Head of weak batteries AC cord not
connect properly.
Function Selector not set properly
Defective tape
Replace battery
Check AC cord connection
Set function selector to position
Try another tape
Sound fades
or
is
unsteady
Dead or weak batteries
Headphones not connected properly
Tape mechanism dirty
Defective tape
Replace battery
Check headphone connection
Clean the head, pinch roller and capstan
Try another tape
Poor radio
reception
Station not tuned
Use TUNING control to adjust, extend
telescopic ANTENNA for FM/SW1-SW2
reception, rotate the unit for AM reception.
