This electric tool is in accordance with the relevant safety requirements. Repairs should only
be carried out by qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard
3. When cleaning or replacing accessories (such as nozzle, container), relieve the system
pressure, so as to avoid spraying any liquid under pressure and avoid any serious injury
hazard.
4. Defective switches or other part that is damaged should be properly repaired or
replaced by an authorized service centre. Do not use the tool if the switch does not turn it on and
off.
5. Warning
The use of any accessory or attachment, other than those recommended in this instruction
manual, may present a risk of injury to persons or animals and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or
persons.
6. Remarks:
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product
especially for any matters that are not referred in the above
3.4- Safety warnings for a safe use
1. Become familiar with the controls and the proper use of the equipment.
2. Use only accessories recommended by the manufacturer
3. Spraying materials are dispensed from the spray nozzle under high pressure. Under no
circumstances should the Spray Gun be pointed towards humans or animals.
4. The Spray Gun must only be used with paints or solvents with a minimum flashpoint of 32°C.
5. When using the Spray Gun indoors ensure that effective ventilation is maintained.
6. Never use the Spray Gun near a naked flame and/or sparks.
7. Do not smoke, eat or drink when using the Spray Gun.
8. Inhalation or ingestion of sprayed particles can be hazardous.
Always wear approved personal protective equipment (e.g. face mask with replaceable filters.)
In the event of inhalation or ingestion, seek medical assistance immediately.
9. Protect the environment. Do not spray in the vicinity of water (e.g. lakes, rivers, reservoirs,…).
10. Caution!
- Never operate an empty spray gun. Pressure may cause injuries to people and animals.
Never block the nozzle of the spray gun using your body or a body part. The high exit pressure may
cause serious injuries.
- Never allow paint to dry in the gun or the container! Dry paint residues will prevent the spray gun
and nozzle from working properly and will void the guarantee.
- Never use liquids containing solids with this device, for example, liquids with a high fibre or
particle content, metallic paints, fire-proof paints or liquids containing asbestos particles.
- Do not use highly flammable liquids. Always ensure that your surroundings are well ventilated!
Always observe the packaging information provided by the manufacture of the materials you are
using!
- Never use the spray gun outdoors when it is raining or windy! When using the spray gun, you
must wear a breathing mask, goggles and ear defenders.
- When interrupting or finishing work, always unplug the device from the power supply to ensure
that it cannot be switched on unintentionally
- Only use three-core extension cables!
Page
8
/
24
