Page
28
/
53
- Some materials may contain chemicals that can be toxic.
Avoid inhalation of dust and any contact
with the skin.
Dust from materials, such as paint containing lead, some wood species, concrete / masonry / stone
containing silica, and minerals as well as metal, may be harmful. Contact with or inhalation of the
dust may cause allergic reactions and/or respiratory or other diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust, especially in
conjunction with additives for wood conditioning (chromate, wood preservative).
Material containing asbestos must only be treated by specialists.
When indicated wear a respirator appropriate for the type of dust generated.
Ensure that the workplace is well ventilated.
Follow national requirements for the materials you want to work with.
- Only well-instructed adults should operate the product. This product is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
- Within the working area, the person using the machine is responsible for any damage or injury
sustained by third parties or their property which has been caused by the machine. Watch your working
area and do not allow third persons or animals to be around.
- Keep hands and other body parts well away from the workpiece while tool is in use.
Keep hands well away from the underside of the workpiece during use. Do not use your hands to
remove any dust, chips or other waste while the tool is in use. Do not touch the bit right after
operation, as it may be hot and cause burns.
- When using tool for screwing/unscrewing, place the bit on the bolt head only when power tool is
switched off.
- Remarks: The safety precautions and instructions given in this manual are unable to cover in detail all
the conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product especially for
any matters that are not referred in the above
- Warning: The use of any accessory or attachment, other than those recommended in this
instruction manual, may present a risk of injury to persons or animals and may cause damages.
3.13- Handling, transport and storage of the disks.
The disks are fragile and sensitive to shocks and impacts. Therefore, special precautions should be
taken:
a) Do not let the disk fall and avoid impacts.
b) Do not use a disk that has fallen or that is damaged.
c) Avoid strong vibrations or vibrations during operation.
d) Prevent damage to the bore
e) Avoid excessive loads on the cutting surface.
f) Store disks perpendicular or flat, in a dry location, protected from frost and at a constant positive
temperature.
g) Keep disks in their original packaging or in special packaging and on shelves.
3.14- Safety information about the charger and the battery-pack
Before using the charger and the battery, read all the instructions and cautionary markings on
charger, battery pack and tool.
1) Charger
a) Do not attempt to open or disassemble the charger. If the charger has been dropped or is
damaged in any way, stop using it and do not attempt to repair it.
Return the charger for repair