V. OPERATION
5.1- Intended use
This product is intended for the pulverization of chemicals on plants.
It should only be used for the dispersion of phyto products, pesticides, herbicides and liquid fertilizers,
authorized and available in the specialized shops.
Always observe the instructions of the manufacturer of the liquid product.
Do not disperse other products with this sprayer.
Any other use different from that stated in this manual can cause damage to the product and present a hazard
to the user
Do not use the sprayer for any other use, such as spraying varnish!
REMINDER
Keep people and animals away from the work area. Never spray towards people, animals or objects that can
be damaged. Remember that the high-speed output nozzle spray can throw objects which could become a
source of danger. The user is solely responsible for the dangers and damage occurring to third persons or
property.
5.2- Starting and stopping the sprayer
Switch with 2 positions:
I : ON => press the switch (4) to start the sprayer:
0 : OFF => release the switch (4) to stop the sprayer:
ATTENION! When the tank runs out of liquid, the pump will continue to run if you keep pressing on the
switch. Do NOT run dry the pump (do not operate the pump without water), to avoid damaging it.
Release the switch to avoid dry operation.
Tips:
Always point the spray nozzle towards the working area,
Press the switch to start the spray.
Simply release the switch to stop the spray operation.
For maximum pump life, the recommended duty cycle of pump operation is one minute “on” and one
minute “off”.
With this in mind it is recommended that the operator avoids running the pump without water.
You can adjust the spray pattern by rotating the nozzle tip (see Fig.2).
