7. Do not overreach
Avoid any abnormal posture. Keep proper footing and balance at all times.
8. Maintain tools with care
- Abide by the maintenance and accessories replacement regulations
- Keep cutting tools sharp and clean for better and safer performance.
- Follow instructions for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
- It is your own interest to keep your machine clean at any time.
- After you finish working, check the machine for any damage.
9. Stay alert
Watch what you are doing. Use common sense. Do not operate tool when you are tired, under the
influence of alcohol, prescription medicines or drugs.
A split second of inattention during use may result in serious bodily injury or property damages.
10. Check damaged parts
- Before further use or reuse of the tool, tool should be carefully checked to determine that it will
operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
- Any parts should be installed properly to comply with the conditions of the machine safe
operation.
- A guard or other part that is damaged should be properly repaired or replaced by an authorized
service centre unless otherwise indicated in this instruction manual.
- Have defective switches replaced by an authorized service centre
- Do not use the tool if the switch does not turn it on and off.
11. Warning
The use of any accessory or attachment, other than one recommended in this instructions manual
may present a risk of injury (to persons or animals) and may cause damages.
The user and/or operator are solely responsible for any damages or injury caused to properties
and/or persons.
12. Have your tool repaired by a qualified person
This electric tool complies with the relevant safety rules.
Repairs should only be carried out by qualified persons using original spare parts; otherwise this
may result in considerable danger to the user.
The use of unauthorized parts or failure to follow the maintenance instructions may result in injury
or damage.
13. Remarks
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product
especially for any matters that are not referred in the above.
3.3- Safety warnings regarding the use
Important notice! Observe any national safety regulations regarding installation, operation and
maintenance.
1. Become familiar with the controls and the proper use of the equipment.
2. The use of this product by children is forbidden.
3. Only well-instructed adults should operate the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use
of the product by a person responsible for their safety.
4. Use only working accessories with a permissible speed at least as high as the no-load speed of
the machine.
5. Do not use tool if tool is damaged, eccentric or vibrating.
6. Do not use tool if the working accessories (blades, spikes) are damaged, cracked, eccentric or
vibrating.
7. Never seize or touch the working accessories (blades/spikes) during operation.
