12
5. SPECIFICATIONS
Ambient Temperature
0
~
40
℃
Ambient Humidity
20
~
80%
Feeding System
Roller Friction System
Hopper Capacity
400 notes
Stacker Capacity
200 notes
Size of Countable Note
50×90
~
110×185(mm)
Thickness of Countable Note
0.05
~
0.2(mm)
Batch Number Displayed
Three Digits (LCD)
Counting Number Displayed
Seven Digits (LCD)
Message Displayed
Three Digits (LCD)
Power Source
AC110
~
220V, 50
~
60Hz
Power Consumption
≤
55W
Dimensions
272mm×235mm×239mm
Weight
5.5Kg
Counting Speed
Speed-1 900 notes/min.
Speed-11 1200 notes/min.
Speed-111 1600 notes/min.
6. ADJUSTMENT OF THE FEED GAP
The correct Feed Gap is vitally important to the smooth functioning of the machine. After a
long-term usage, the rubber components of both the Feed Roller and the Friction Roller may be
subject to natural wear. Under this condition, the Feed Gap may become too wide and, as a
result, Error Codes will be generated and note feeding will become erratic.
To check and adjust the Feed Gap to counteract this simple wear condition, follow the 3 steps
below, in conjunction with the photograph:
1.
Manually insert a genuine banknote into the Feed Gap and move it back and forth. If you
don’t feel any resistance, it indicates the gap is too wide; if the resistance is very strong, it
indicates the gap is too narrow.
2.
If the Feed Gap is found to be too wide, adjust the Thickness Knob counter-clockwise to
reduce the Feed Gap until the proper slipping-resistance is achieved with your banknote.
3.
If the Feed Gap is found to be too narrow, adjust the Thickness Knob clockwise to
increase the Feed Gap until the proper slipping-resistance is achieved with your banknote.
