CS-311S
Operation Manual
V1.2
Page 10 of 17
·Under main interface,press M+Key to save the quantity and amount
for genuine coins.It saves the accumulated data of the counting
results
。
Under main interface, when the counting quantity and
amount for genuine coins is 0, you can press M+ key to clear the
saved data.
Data Memory Read:
·Under main modes interface, press MR key to read stored data;
·Under self-learning interface, press M+ Key to read the original
self-learning data, this function is only available for maintenance
people.
9. Function Settings:
Press SET key to enter into Menu interface, shown as follows:
MENU
4.TOTAL
2.VALUE
5.TEST
6.LEARN
3.SYSTEM
> 1.BATCH
Directly press
，
，
，
four keys to choose target submenu
and then press SET key to enter each into detailed operation
interface:
(1)
BATCH
BATCH SET
VALUE:
CHANNEL:
0000
BATCH:
1
2.00
Enter into BATCH SET interface
，
press
，
key to switch the
channel.Under one channel, pressSET key
，
the BATCH will flash, at
this moment you can set the BATCH value through the numeric key
0 ~ 9
（
the upper limit is 9999
）
。
Press CLRkey you can clear the
BATCH setting.
