34
34
GG
BB
S
PARK
In order to make the systems mentioned above give the best performances, you
need to install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into
contact with the external copper sheath, since this would prevent the
antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91
code ACG5454
SPARK ANTENNA 433
code ACG5452
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7061
R
ADIO TRANSMITTER MOON
ACG6081 - MOON 433
ACG7025 - MOON 91
ACG6082 - MOON 433
ACG7026 - MOON 91
1
RELÉ CARD
1 Relé Card to obtain a 1 second contact or supplies for 3 minutes a
40W max light. code ACQ9075
C
OLUMN WITH ELECTROMAGNETIC BLOCK
Column with electromagnetic block with DEGAUSSER card and
transformer. code ACG8070
H
EATER
Motor heating board for EUROBAR (for prompt start at low
temperatures).
code ACQ9097
M
AGNETIC LOOP
Self-ajusting metallic mass detector with an inductive coil.
code ACG9060
C
ODE LEARNING SYSTEM RADIORECEIVERS
RX91/A quarzata and coupling
code ACG5005
RX433/A super eterodyne and coupling
code ACG5055
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
F
IT SYNCRO
FIT SYNCRO PHOTOCELLS
for the wall-installation code ACG8026
The range you can set is 10-20m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the
SYNCRO TRANSMITTER
code ACG8028
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
code ACG8051