12
6
"
"
"
"
"
STEP 6:
Note: Make sure that the
closed end of ‘Part H’ is
facing the front of the
drawer unit, as shown.
STEP 7:
STEP 8:
Slot the Drawer Supports
from ‘Step 7’ into the
Racking Unit at your
preferred height. May use a
Rubber Mallet to tap gently,
or a screwdriver to guide
the tabs into the slots.
STEP 9:
The Drawer should slide in
with ease. If it is difficult,
check that the alignment of
the drawer runners is
correct, and that ‘Step 8’
has been inserted in the
correct direction.
WARNING
•
Drawer Maximum Load is 15kg
•
If the Drawer is overloaded, the Racking Unit may tip over
•
In the event of heavy loading, the Racking Unit may be
fixed to the wall for added security (screws not provided).
