RIAN NDS3542A, Руководство пользователя

Страница: 18 / 38

LCD display would show them, users just need press LEFT and RIGHT buttons to
choose and press ENTER button to confirm.

RF Frequency
The RF output frequency range is from 30 to 960MHz with 1K stepping. After entering
the RF frequency setting submenu, users the can press LEFT, RIGHT, UP, and DOWN
buttons to adjust the frequency and confirm by press ENTER button.

RF Out Level
The RF attenuation range is -30~-10dbm (81~97dbµV) with 0.1db step. After entering
this setting submenu, user can shift UP/DOWN/LEFT/RIGHT key to set the output
level and press ENTER to confirm.

RF On
This interface is to decide whether to enable the RF (carrier A) output or not.
OFF: to disable programs to output through carrier A.
ON: to enable programs to output through carrier A.
NOTE: The setting principle of “3.2” is the same with “3.1” explained above.

ASI Output
If the encoder & modulator is with dual-carrier output: Output A and Output B.
Code Rate
1/2 2/3 3/4 5/6
RF Frequency
750.000 MHz
RF Out Level
-10.0 dbm
RF On
Off On