RI SATURN 5 Скачать руководство пользователя страница 7

Страница: 7 / 42

Section 3

Saturn

™

5 Laser Systems Safety Warnings

Research Instruments Ltd

SECTION 3 - SAFETY

Cautions and Warnings

Laser radiation is present within the control unit, the fibre optic patch lead and through the micro

scope to output at the objective. The Saturn 5 Laser System has been designed to ensure that emis

sion of laser radiation at any point is within the limits stipulated by international safety standards,

IEC 60825-1:2014, and US 21CFR1040.10 for unprotected viewing (Class 1). As an extra precaution, an

infrared blocking filter has been incorporated into the optical path leading to the eyepieces to reduce

laser emission by a further 99%.
For a description of controls and for the location of laser aperture on control unit, see Section 4 -

Hardware Overview.

DO NOT

disassemble or modify any part of the Saturn 5 Laser System, or substitute any

component for any other. Doing so may result in exposure to dangerous levels of laser

radiation. This voids the warranty and/or service contract.

DO NOT operate the laser unless it is properly mounted to a microscope.

ONLY

use the power cable and power supply adaptor supplied with the system.

The cable to the power supply is the Disconnect Device for this equipment. To remove all

electrical power from this product, disconnect the power cable from the electrical outlet.

Equipment should be positioned so as to allow easy access to the power cable. The appliance

coupler or mains plug is used as the disconnect and must remain readily operable.

WARNING

To avoid the risk of electric shock, this equipment must only be connected to

a mains supply with protective earth.

WARNING

Not to be used in a patient environment

CAUTION

Hazardous radiation exposure may occur through the use of controls, executing

adjustments or the performance of procedures other than those specified herein. Servicing

and adjustment other than that specified in this manual should only be carried out by RI

or RI authorised agents.

This indicates cautionary text which should be followed to avoid injury to users or damage

to samples.

The system should be operated by qualified and trained personnel only.

Содержание SATURN 5











































Результаты поиска

Содержание SATURN 5

Отзывы:

Похожие инструкции для SATURN 5

Бренды по названию

Популярные бренды

RI SATURN 5, Руководство пользователя

Результаты поиска

Содержание SATURN 5

Отзывы:

Похожие инструкции для SATURN 5

Бренды по названию

Популярные бренды