Ri-Art i.Shine 3148 RGBW, Руководство пользователя

Страница: 11 / 19

2.2-2 DMX512 ADDRESSING WITH ID ADDRESS
Connect the DMX512 controller to the units in series
When set 10 dmx channel mode, each unit will has 10 DMX channels so
the DMX Addresses should increase by increments of 10 (e.g.
1,11,21,31...)
Each DMX Address may be used as many times as required.
Any DMX address in the range from 001 to 511 may be used.
Each DMX address may carry up to 50 separate ID addresses.
ID
should be set in the menu on each unit in ascending values (i.e. 1, 2,
3...)
ID addresses are accessible from Ch10 on the DMX512 controller at 10
channel dmx mode.
Example:
The figure above shows a simple DMX layout which has used three units at
each DMX address. The three units have different ID addresses which
allows the user to collectively control the whole group of units at that DMX
address by settingCH10 to 0, or to control each unit independently by first
selecting the DMX address and then by using CH10 to select the target ID
address
。