TO FOLD WHEELCHAIR FOR STORAGE
Make sure the Footrests are in the forward locked
position with the Footplates in the vertical position
or REMOVE the Footrests by pulling the Release
Levers, swinging the Footrests outward and lifting
them from the hinge pins. Standing behind the
chair, grab the center of the seat and pull up until
closed.
OPERATING WHEEL LOCKS
Engage by pushing the levers forward until they
lock into place and disengage by pulling back on
the levers until the wheels roll freely.
Clean frame with a damp cloth and dust
weekly.
Clean upholstery and armrests with mild
soap and water.
Never use abrasive cleansers or scouring
pads.
If exposed to liquid, dry the wheelchair
thoroughly as soon as possible.
If any component appears worn or is not
working properly, contact an authorized
dealer for repair and/or appropriate
replacement parts.
Solid rubber tires need minimal mainte-
nance, but should be cleaned occasionally
with a damp cloth.
If tires become severely worn or cracking
appears, contact an authorized dealer.
Wheels and Casters should be checked
periodically and adjusted and lubricated as
needed by an authorized dealer.
OPERATING INSTRUCTIONS
MAINTENANCE
Rhythm Healthcare, LLC
Lifestyle Mobility Aids
3200 Tyrone Blvd N
St. Petersburg, FL 33710
contactus
@
rhythmhc.com
Website: www.rhythmhc.com
(877) 843-6464
V3: 10/20/21
TO SET UP WHEELCHAIR
Open wheelchair by tilting to one side and
pushing down on seat rail until opened.
Attach Footrests by aligning holes on tabs at
top of Footrests with hinge pins on outside
of front frame, then swing Footrests to front
until Footrest Release Levers lock into place.
Adjust Footrest length (while user is seated)
by loosening the cam lever just above the
Footplate, pushing in the adjustment button
and sliding the inner tubing up or down to
desired setting until the adjustment button
protrudes fully from the adjustment hole.
Then snap cam lever back into place.
Make sure the Footplate is at least 2.5” from
the floor for proper clearance.
STORAGE
