To maintain the original finish, clean with
mild soap and rinse with warm water.
Wipe stool dry after each use.
ASSEMBLY INSTRUCTIONS
MAINTENANCE
Swivel
Seat
Receptacle
Leg
Height
Adjustment
Storage
Tray
Rubber
Feet
1. Remove stool parts from carton.
2. Place seat upside-down. Insert each leg into
the bottom of the seat. Repeat this for the
three remaining legs. Ensure that the legs
are secured in place and that all four legs
are at same height for stability and safety.
3. Turn the stool right-side-up. Place storage
tray between legs while inserting the cross
braces into the four slots at the bottom of
the receptacle legs.
4. Ensure the rubber feet are in good
condition and free of rips, tears and
other signs of wear. All four feet must be
flat on floor at all times. Stool is intended
for sitting only. Do not stand on stool.
1. To rotate padded seat, pull up on handle
until seat is free and rotate to desired
position. Seat can rotate in both directions
for a full 360° and locks in 12 positions.
Before user stands or sits, make sure the seat
is in one of the 12 locked positions.
PARTS DIAGRAM
450 lb
Weight Capacity
