[10]
operation. Do not overstress the wires
by applying excessive load to the
brush.
The wire bristles can easily
penetrate light clothing and/or skin.
b)
If the use of a guard is recommended
for wire brushing, do not allow any
interference of the wire wheel or brush
with the guard.
Wire wheel or brush
may expand in diameter due to work
and centrifugal forces.
c)
Safety goggles or safety glasses with
side shields and a full face shield
compliant with ANSI Z87.
1
MUST be
worn by the operator and others that
are within 50’ (15.2m) of the use of this
product.
Additional Safety Information
WARNING: ALWAYS
use safety
glasses. Everyday eyeglasses are NOT
safety glasses. Also use face or dust mask
if cutting operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA
94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NIOSH/OSHA/MSHA respiratory
protection.
WARNING:
Some dust created by
power sanding, sawing, grinding, drilling,
and other construction activities contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
•
Lead from lead-based paints,
•
Crystalline silica from bricks and cement
and other masonry products, and
•
Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
•
Avoid prolonged contact with dust
from power sanding, sawing, grinding,
drilling, and other construction
activities. Wear protective clothing
and wash exposed areas with soap and
water.
Allowing dust to get into your
mouth, eyes, or lay on the skin may
promote absorption of harmful
chemicals.
WARNING:
Use of this tool can
generate and/or disperse dust, which may
cause serious permanent respiratory or
other injury. Always use NIOSH/OSHA
approved
respiratory
protection
appropriate for the dust exposure. Dire
particles away from face and body.
WARNING: Always wear proper
personal hearing protection that conforms
to ANSI S12.6 (S3.19) during use.
Under
some conditions and duration of use, noise
from this product may contribute to hearing
loss.
CAUTION: When not in use, place tool
on its side on a stable surface where it will
not cause a tripping or falling hazard.
Some tools with large battery packs will
stand upright on the battery pack but may
be easily knocked over.
•
Air vents often cover moving parts and
should be avoided.
Loose clothing,
jewelry or long hair can be caught in
moving parts.
