Make connections to live and negative
on the control box and feed through
rear of the battery box.
Feed red and black wires through.
Make secure metal-to-metal
connections to live and neutral on
battery terminals.
Ensure on/off switch is mounted in the
line of the positive line to the battery.
Connect On/Off Switch.
Use 22mm spade drill to make
mounting hole for On/Off switch through
battery box, usually underneath the
hook up connector.
Another suitable location may be
required.
WARNING -
do not position
near a gas bottle.
WARNING -
do not use your mover
without an On/Off switch being fitted.
Coil up excess wiring and cable
strap into neat 300mm diameter coils
and secure under bunk. Ensure all
terminals are tight. Replace covers.
You are now ready to start using your
mover, please refer to the
operating
instructions
on our website -
www.rhynomovers.com.
