Rhyas BGM4006, Оригинальное руководство пользователя

Страница: 6 / 12

EN
6
To prevent the grinding surface from blocking up,
avoid holding wood, lead or any other soft material
or metal against the grinding wheel. To avoid
creating grooves, do not press the workpiece
too firmly on the grinding wheel. Use water to
regularly cool the workpiece being ground. Wood
chisels and the like should never be sharpened
‘blue’. Take care not to lose your grip on the
object being ground, as it may suddenly become
jammed between the tool rest and the grinding
wheel. This can cause the stone to shatter, the
motor to seize, or the workpiece to fly off, all of
which can cause injury and damage. Whenever
the machine has been in use for 30 minutes, it
should be switched off. Allow the machine to cool
down to room temperature.
Operation
• Check that the switch is in the “OFF/0” position
before connecting the machine to the power
supply.
• Press the power switch into the “ ON/1”
position to start your bench grinder.
• Always keep the power cord out of the way of
the tool’s moving parts.
5. Maintenance
Make sure that the machine is not live
when carrying out maintenance work
on the motor.
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Trouble shooting
Should the machine fail to function correctly, a
number of possible causes and the appropriate
solutions are given below:
• The electric motor becomes hot
• The motor has become overloaded.
• Give the motor a chance to cool down.
• The motor is defective.
• Contact the service point.
• Machine switched on, but will not run
• There is a break in the power supply to the
machine.
• Check whether there is a break in the
power cord.
• The switch may be damaged.
• Contact the service point.
Repairs and servicing should only be
carried out by a qualified technician or
service firm.
Cleaning
Keep the ventilation slots of the machine clean
to prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage
the plastic parts.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Warranty
The guarantee conditions can be found on the
separately enclosed guarantee card.