Page 6
7. Loosely fasten the rear seat back
brackets to the rear seat back
cushion using (4) M6 x 25
Hex Head Bolts, (4) Lock
Washers and (4) Flat Washers
(black arrows, Bag #5).
8. Loosely fasten the seat back
assembly to the front of the
utility box using (4) M8 x 25 Hex
Head Bolts and (4) Flat Washers
(red arrows, Bag #4).
NOTE: Hardware may be
pre-installed on box if not in Bag.
9. Tighten the hardware left loose in
Steps 7 and 8.
10. Place the seat box assembly on top of the horizontal support brackets. Loosely
fasten the box to the brackets using (4) M8 Flat Washers and (4) M8 Nylock Nuts
(Bag #4).
11. Place the handrails and handrail extensions through the openings in the box.
