RHDC2
- 9 -
TO CLEAN OR REPLACE THE FILTER
4. Press the button to open the front cover of the main body and take out the filter. Wash
the filter under running water. Let it completely dry before reinstalling it.
To replace the filter, follow the same instructions as above or as illustrated below.
TO REINSTALL THE COMPONENTS
Follow step 1 to 4 on page 5 and 6.
The device will shut down if the turbo brush is jammed or has cumulated to much
debris.
If so, turn off the device and check for any debris causing the jam (often, hair or carpet
thread is the issue). We suggest using scissors or a sharp knife to free unwanted
debris.
HOW TO CLEAN THE TURBO BRUSH
User Guide
The Roll Brush itself might need cleaning.
IMPORTANT: Do not wash the Roll Brush with water.